Departments / Parts Department / Kubota Parts / Kubota Lubricants
Hydraulic Oil
Kubota Super UDT2Universal Trans-Hydraulic Fluid Information
Kubota Super UDT2is a multi-purpose all-weather hydraulic fluid.This product is specifically recommended for use in the Kubota hydraulic, final drive, transmission, differential, and wet brake systems.
- Kubota®Super UDT2provides the following benefits to Kubota equipment:
- Kubota Super UDT2Universal Trans-Hydraulic Fluid
- Improved transmission performance and protection at high and low operating temperatures
- Unique friction characteristics on wet clutches enables smoother start off, drive control, and PTO connection
- Fully interchangeable with standard UDT and Super UDT fluids
- Superior corrosion resistance and efficient filterability protects transmission and hydraulic systems
- Improved transmission efficiency through reduction in power loss
- Meets Kubota’s stringent specifications
For reliable, long lasting performance of your Kubota equipment, choose Kubota Genuine Products.
| Typical Properties | Super UDT2Fluid |
|---|---|
| Gravity, degree API | 34.5 |
| Viscosity @ -40º C, cP | 16000 |
| Viscosity @ 100º C, cSt | 8.1 |
| Viscosity @ 40º C, cSt | 37 |
| Viscosity Index | 199 |
| Pour Point, ºC max | -42 |
| Zinc, % wt. | 0.1122 |
| Product Codes | Container Sizes Available |
|---|---|
| 70000-40200 | 12/1 Quart |
| 70000-40201 | 4/1 Gallon |
| 70000-40202 | 2/2.5 Gallon |
| 70000-40205 | 5 Gallon Pail |
| 70000-40255 | 55 Gallon Drum |
| 70000-40233 | 325 Gallon Tote |
Kubota UDT Fluid
Kubota UDT Fluid is a multi-purpose, all-weather tractor hydraulic fluid specifically recommended for the Kubota hydraulic, final drive, transmission, differential and wet brake systems of tractors. This product offers the following benefits to Kubota equipment:
- Improves efficiency in synchro- and glide shift transmissions
- Fully interchangeable with Super UDT2fluids
- Provides high performance protection even at high operating temperatures
- Meets Kubota's stringent specifications
| Product Codes | Container Sizes Available |
|---|---|
| 70000-20000 | 12/1 Quart |
| 70000-20001 | 4/1 Gallon |
| 70000-20002 | 2/2.5 Gallon |
| 70000-20005 | 5 Gallon Pail |
| 70000-20055 | 55 Gallon Drum |
| 70000-20033 | 325 Gallon Tote |
Kubota Excavator Hydraulic Oils
Kubota Excavator Hydraulic Oils are uniquely formulated and designed to meet the stressful requirements of Kubota’s Excavators. This product offers the following benefits to Kubota equipment:
- The high viscosity provides consistent performance throughout the entire system, where temperatures may vary widely
- Superior corrosion resistance keeps machine parts clean and free of corrosion
- Excellent anti-foaming properties guard against cavitation of pumps and loss of hydraulic pressure
- Better oxidation resistance fights sludge and prolongs the fluid’s useful life
- Compatible with other hydraulic oils brands, so there is no need to change the entire system to start using the Kubota’s Hydraulic Oil
- Provides high performance protection for your excavators
- Meets Kubota's stringent specifications
| Product Codes | Container Sizes Available |
|---|---|
| 70000-68720 | 5 Gallon Pail of ISO VG32 |
| 70000-68740 | 55 Gallon Drum of ISO VG32 |
| 70000-68760 | 5 Gallon Pail of ISO VG46 |
| 70000-68780 | 55 Gallon Drum of ISO VG46 |
Engine Oil
Kubota Heavy Duty Engine Oils are engineered to meet the most demanding lubrication requirements of today's naturally aspirated, turbocharged and supercharged diesel fueled engines, including engines with cooled exhaust gas re-circulation (EGR). They are formulated with advanced additive technology, ( including foam control and soot dispersancy additives.) The engine oils provide and premium quality base stocks to protect engines against undesirable deposits, corrosion, deposits, oxidation, wear, and viscosity and thermal breakdown under severe service conditions. They meet the highest API (American Petroleum Institute) Service Categories for modern low emission diesel engines. These oils can also be used in transmission, hydraulic systems and other industrial applications where the manufacturer recommends the use of an engine oil.
Typical Properties
| 15W40 | 10W-30 | 30 | |
|---|---|---|---|
| Gravity, degree API | 29.5 | 31.1 | 29.7 |
| Viscosity @ 40 C, cSt | 117 | 80 | 86.89 |
| Viscosity @ 100 C, cSt | 15.2 | 11.9 | 11 |
| Viscosity Index | 135 | 143 | 113 |
| CCS Viscosity @ -25 C, cP | - - - - | 6600 | - - - - |
| CCS Viscosity @ -20 C, cP | 6600 | - - - - | - - - - |
| HTHS Viscosity, cP | 4.2 | 3.5 | 3.7 |
| Borderline Pumping Viscosity | Pass | Pass | - - - - |
| Pour Point, deg. C | -27 | -33 | -24 |
| Total Base Number (D-2896) | 9 | 10 | 7 |
| Sulfated Ash, % | 1 | 1 | 0.8 |
| Zinc, wt % | 0.13 | 0.13 | 0.13 |
Performance
| 10W-30 | 30 | 15W40 | |
|---|---|---|---|
| API CJ-4/CI-4/CI-4 Plus/CH-4/ | X | X | |
| CG-4/CF-4 | |||
| API CF-2/CF | X | ||
| API SL/SJ/SH/SG | X | X | |
| API SF | X | X | X* |
| CATERPILLAR | X# | X# | X |
| CUMMINS (CES 20081) | X## | ||
| DETROIT DIESEL | X | ||
| NAVISTAR | X | X |
*Meets requirements
#Meets proposed Caterpillar ECF-1Specification Requirements ##Meets the engine performance requirements of CES 20078
Product Codes and Container Sizes Available
| 15W-40 | 10W-30 | SAE30 | |
|---|---|---|---|
| 12/1 Quart | 70000-10000 | 70000-10200 | 70000-10100 |
| 4/1 Gallon | 70000-10001 | 70000-10201 | 70000-10101 |
| 2/2.5 Gallon | 70000-10002 | 70000-10202 | Not Available |
| 5 Gallon Pail | 70000-10005 | 70000-10205 | Not Available |
| 55 Gallon Drum | 70000-10055 | 70000-10255 | 70000-10155 |
| 325 Gallon Tote | 70000-10033 | 70000-10233 | Not Available |
Gear Oil
Kubota Gear Oil
Kubota Gear Oils are superior sulfur-phosphorus, extreme pressure gear lubricants formulated with premium quality base stocks to meet the demands for excellent performance. They are designed to provide excellent load carrying capacity, extreme pressure properties, anti-foam performance, demulsibility, corrosion protection, thermal stability protection and service fill limited slip capability. These products are recommended for conventional rear axles, limited slip rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque, and high horsepower conditions. Kubota Gear Oils meet or exceed: Ford M2C108C; Mack GO-H, GO-H, & GO-J; Mil-L-2105E; API Services GL-5, GL-4.
Typical Properties
| SAE 80W-90 | SAE 85W-140 | |
|---|---|---|
| Vis @ 100 C (cSt) | 14.5 | 26.7 |
| Vis @ 40 C (cSt) | 141 | 361 |
| Viscosity Index | 98 | 99 |
| Spec Gravity @ 60F | 0.9 | 0.904 |
| Density (lbs/gal) | 7.49 | 7.53 |
| Brookfield Vis., Cp | 117,000(-26C) | 100,000(-15C) |
| Pour Point, C | -27 | -15 |
Performance
| SAE 80W-90 | SAE 85W-140 | |
|---|---|---|
| MIL-L-2105E | X | X |
| API GL-4 | X | X |
| API GL-5 | X | X |
Product Codes and Container Sizes Available (SAE 80W-90)
| 12/1 Quart | 70000-10500 |
| 2/2.5 Gallon | 70000-10502 |
Kubota Excavator Gear Oil 90
Kubota Excavator Gear Oil is formulated and designed to meet the stressful requirements of Kubota’s Excavators. It was developed and approved by Kubota Japan R&D. Its high viscosity index allows use in a wide range of temperatures. The low pour point allows for low temperature operation, while the high flash point ensures operator safety. The Excavator Gear Oil has superior anti-foam, anti-corrosion, and good antioxidant performance.
| Typical Properties | |
|---|---|
| Viscosity @ 40° C | 199.5 mm2/s |
| Viscosity @ 100° C | 18.01 mm2/s |
| Viscosity Index | 99 |
| Pour Point | -24 C |
| Flash Point | 254 C |
| Foaming Seq.I | 0.0 ml |
| Foaming Seq.II | 0.0 ml |
| Copper Corrosion | 1a |
| Product Codes and Container Sizes Available | |
|---|---|
| Excavator Gear Oil 90/1 Qt. | 70000-68700 |
Grease
Kubota Synthetic Extreme Duty Grease
Designed for use in agricultural, automotive, construction, industrial and recreational applications.
Synthetic Food Grade NLGI 2, GCLB rated, extreme pressure grease with PTFE micro powders.
- Corrosion protection – impervious to salt water
- Lasts three times to four times longer than petroleum-based products
- Will not run or drip
- Does not evaporate
- Compatible with most other greases
- NSF Registered (H-1 Safe for incidental food contact) meets 1998 USDA Guidelines – approved for use in a federally inspected beef or poultry processing facility
- Non-toxic, clean, non-staining
- Operating temperature range -45°F to +450°F
Applications:
- Areas where a synthetic, non-toxic or food grade grease is required or desired
- Food processing equipment
- Near livestock, i.e. gates, hinges, etc.
- Equipment used in lawn care and agriculture applications near sensitive vegetation (non-toxic)
| Product Codes and Container Sizes Available | |
|---|---|
| 77700-06321 | 14 oz. |
| 77700-06322 | 30 lb. Pail |
Kubota Polyurea Multi-Purpose Grease
Designed for use in agricultural, automotive, construction, industrial and recreational applications.
Premium Polyurea thickened, NLGI 2, GC-LB rated extreme pressure grease.
- Superior rust and corrosion protection
- Excellent resistance to water wash out
- Compatible with most other greases (shear stable)
- Outstanding high temperature stability for long service life
- Operating temperature range -15°F to +380°F
Applications
- Wet environments
- Extreme pressure applications
- General purpose grease
- Electric motors
| Product Codes and Container Sizes Available | |
|---|---|
| 70000-10701 | 14 oz. |
| 70000-10735 | 35 lb. Pail |
| 70000-03523 | 3 oz. (Pack of 2) |
Kubota Moly-Lithium All-Purpose Heavy Duty Grease
Designed for use in agricultural, automotive, construction and industrial applications.
Specially formulated lithium complex with 3 percent molybdenum disulfide/graphite NLGI 2, GC-LB rated extreme pressure grease.
- Will not plate out forming an adhering film on metallic surfaces reducing the coefficient of friction
- Molybdenum disulfide/graphite will act as a dry lubricant when necessary
- Cost effective
- Excellent high temperature protection – operating range 0°F to +350°F
Applications
- Metal to metal applications
- Fifth wheel grease
- Heavy duty construction and off-road equipment (mining)
- Excellent for bucket and king pins
| Product Codes and Container Sizes Available | |
|---|---|
| 70000-10401 | 14 oz. |
